neo.webmaster.2@gmail.com
5b837e0112
Some checks failed
Build NFDOS ISO / build (push) Has been cancelled
616 lines
29 KiB
Markdown
616 lines
29 KiB
Markdown
grep -n "^[ ]\+" /home/neo/Público/nfdos/src/Makefile.am
|
|
grep -n "^[ ]\+" /home/neo/Público/nfdos/configure.ac
|
|
file Makefile.am
|
|
file src/Makefile.am
|
|
file configure.ac
|
|
cat -A Makefile.am | grep '\^I'
|
|
cat -A src/Makefile.am | grep '\^I'
|
|
cat -A configure.ac | grep '\^I'
|
|
nl -ba Makefile | sed -n '770,790p'
|
|
grep -n "^[ ]" Makefile | head
|
|
|
|
grep -E 'X86_PGE|X86_PSE|X86_PSE36|X86_VME|X86_PVI|SMAP|SMEP|RANDOMIZE_BASE|PAGE_TABLE_ISOLATION' src/_nfdos/kernel/linux/.config
|
|
grep -E '^CONFIG_CR4' src/_nfdos/kernel/linux/.config || true
|
|
|
|
|
|
┌────────────────────────────────────────────────────────────────────────────┐
|
|
│ NEUROTRON STATUS CPU: 2% MEM: 11% TEMP: 1.2 ENERGY: 41.0 │
|
|
│ CogState: STABLE Depth: 1 Valence: -5.00 Mode: ACTIVE │
|
|
├────────────────────────────────────────────────────────────────────────────┤
|
|
│ KERNEL MESSAGES (live): │
|
|
│ [ 0.167890] ACPI: Core revision 20240415 │
|
|
│ [ 0.260302] pci 0000:00:02.0: VESA 1024x768x32 framebuffer activated │
|
|
│ [ 1.012399] EXT4-fs mounted filesystem with ordered data mode. │
|
|
│ ... │
|
|
├────────────────────────────────────────────────────────────────────────────┤
|
|
│ NEUROTRON TRM: │
|
|
│ mem estável — tendência favorável │
|
|
│ sistema frio — margem para explorar │
|
|
│ valência baixa — evitar exploração │
|
|
├────────────────────────────────────────────────────────────────────────────┤
|
|
│ NEUROTRON CHAT: │
|
|
│ [ia@nfdos] Olá mundo! │
|
|
│ [user@nfdos] ... │
|
|
├────────────────────────────────────────────────────────────────────────────┤
|
|
│ user@nfdos: │
|
|
└────────────────────────────────────────────────────────────────────────────┘
|
|
|
|
Quando quiseres damos o próximo passo: Ritmos Internos — osciladores cognitivos leves (senoides, modulação lenta, ciclos internos).
|
|
São eles que vão permitir padrões emergentes mais profundos.
|
|
|
|
grep ok:
|
|
```
|
|
grep -R "NFDOS_CR4_SAFE_MASK" -n src/_nfdos/kernel/linux/arch/x86/mm
|
|
src/_nfdos/kernel/linux/arch/x86/mm/init.c:39:#define NFDOS_CR4_SAFE_MASK \
|
|
src/_nfdos/kernel/linux/arch/x86/mm/init.c:252: mask &= NFDOS_CR4_SAFE_MASK;
|
|
```
|
|
sequencia da compil tambem ok:
|
|
```
|
|
Compilando Kernel Linux...
|
|
make mrproper
|
|
CLEAN arch/x86/entry/vdso
|
|
CLEAN arch/x86/kernel/cpu
|
|
CLEAN arch/x86/kernel
|
|
CLEAN arch/x86/realmode/rm
|
|
CLEAN arch/x86/tools
|
|
CLEAN init
|
|
CLEAN usr
|
|
CLEAN .
|
|
CLEAN scripts/basic
|
|
CLEAN scripts/kconfig
|
|
CLEAN scripts/mod
|
|
CLEAN scripts
|
|
CLEAN include/config include/generated arch/x86/include/generated .config .config.old
|
|
make allnoconfig
|
|
HOSTCC scripts/basic/fixdep
|
|
HOSTCC scripts/kconfig/conf.o
|
|
HOSTCC scripts/kconfig/confdata.o
|
|
HOSTCC scripts/kconfig/expr.o
|
|
LEX scripts/kconfig/lexer.lex.c
|
|
YACC scripts/kconfig/parser.tab.[ch]
|
|
HOSTCC scripts/kconfig/lexer.lex.o
|
|
HOSTCC scripts/kconfig/menu.o
|
|
HOSTCC scripts/kconfig/parser.tab.o
|
|
HOSTCC scripts/kconfig/preprocess.o
|
|
HOSTCC scripts/kconfig/symbol.o
|
|
HOSTCC scripts/kconfig/util.o
|
|
HOSTLD scripts/kconfig/conf
|
|
#
|
|
# configuration written to .config
|
|
#
|
|
→ Patching kernel headers for C23 compatibility...
|
|
make prepare
|
|
SYSHDR arch/x86/include/generated/uapi/asm/unistd_32.h
|
|
SYSHDR arch/x86/include/generated/uapi/asm/unistd_64.h
|
|
SYSHDR arch/x86/include/generated/uapi/asm/unistd_x32.h
|
|
SYSTBL arch/x86/include/generated/asm/syscalls_32.h
|
|
SYSHDR arch/x86/include/generated/asm/unistd_32_ia32.h
|
|
SYSHDR arch/x86/include/generated/asm/unistd_64_x32.h
|
|
SYSTBL arch/x86/include/generated/asm/syscalls_64.h
|
|
HOSTCC arch/x86/tools/relocs_32.o
|
|
HOSTCC arch/x86/tools/relocs_64.o
|
|
HOSTCC arch/x86/tools/relocs_common.o
|
|
HOSTLD arch/x86/tools/relocs
|
|
HOSTCC scripts/kallsyms
|
|
HOSTCC scripts/sorttable
|
|
WRAP arch/x86/include/generated/uapi/asm/bpf_perf_event.h
|
|
WRAP arch/x86/include/generated/uapi/asm/errno.h
|
|
WRAP arch/x86/include/generated/uapi/asm/fcntl.h
|
|
WRAP arch/x86/include/generated/uapi/asm/ioctl.h
|
|
WRAP arch/x86/include/generated/uapi/asm/ioctls.h
|
|
WRAP arch/x86/include/generated/uapi/asm/ipcbuf.h
|
|
WRAP arch/x86/include/generated/uapi/asm/param.h
|
|
WRAP arch/x86/include/generated/uapi/asm/poll.h
|
|
WRAP arch/x86/include/generated/uapi/asm/resource.h
|
|
WRAP arch/x86/include/generated/uapi/asm/socket.h
|
|
WRAP arch/x86/include/generated/uapi/asm/sockios.h
|
|
WRAP arch/x86/include/generated/uapi/asm/termbits.h
|
|
WRAP arch/x86/include/generated/uapi/asm/termios.h
|
|
WRAP arch/x86/include/generated/uapi/asm/types.h
|
|
WRAP arch/x86/include/generated/asm/early_ioremap.h
|
|
WRAP arch/x86/include/generated/asm/mcs_spinlock.h
|
|
WRAP arch/x86/include/generated/asm/mmzone.h
|
|
WRAP arch/x86/include/generated/asm/irq_regs.h
|
|
WRAP arch/x86/include/generated/asm/kmap_size.h
|
|
WRAP arch/x86/include/generated/asm/local64.h
|
|
WRAP arch/x86/include/generated/asm/mmiowb.h
|
|
WRAP arch/x86/include/generated/asm/module.lds.h
|
|
WRAP arch/x86/include/generated/asm/rwonce.h
|
|
GEN arch/x86/include/generated/asm/orc_hash.h
|
|
UPD include/config/kernel.release
|
|
UPD include/generated/uapi/linux/version.h
|
|
UPD include/generated/utsrelease.h
|
|
UPD include/generated/compile.h
|
|
CC scripts/mod/empty.o
|
|
HOSTCC scripts/mod/mk_elfconfig
|
|
MKELF scripts/mod/elfconfig.h
|
|
HOSTCC scripts/mod/modpost.o
|
|
CC scripts/mod/devicetable-offsets.s
|
|
UPD scripts/mod/devicetable-offsets.h
|
|
HOSTCC scripts/mod/file2alias.o
|
|
HOSTCC scripts/mod/sumversion.o
|
|
HOSTCC scripts/mod/symsearch.o
|
|
HOSTLD scripts/mod/modpost
|
|
UPD include/generated/timeconst.h
|
|
CC kernel/bounds.s
|
|
UPD include/generated/bounds.h
|
|
CC arch/x86/kernel/asm-offsets.s
|
|
UPD include/generated/asm-offsets.h
|
|
CALL scripts/checksyscalls.sh
|
|
CHKSHA1 include/linux/atomic/atomic-arch-fallback.h
|
|
CHKSHA1 include/linux/atomic/atomic-instrumented.h
|
|
CHKSHA1 include/linux/atomic/atomic-long.h
|
|
DESCEND objtool
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libsubcmd/exec-cmd.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libsubcmd/help.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libsubcmd/pager.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libsubcmd/parse-options.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libsubcmd/run-command.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libsubcmd/sigchain.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libsubcmd/subcmd-config.o
|
|
LD /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libsubcmd/libsubcmd-in.o
|
|
AR /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libsubcmd/libsubcmd.a
|
|
INSTALL libsubcmd_headers
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/arch/x86/special.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/arch/x86/decode.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/arch/x86/orc.o
|
|
LD /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/arch/x86/objtool-in.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/weak.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/check.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/special.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/builtin-check.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/elf.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/objtool.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/orc_gen.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/orc_dump.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libstring.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/libctype.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/str_error_r.o
|
|
CC /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/librbtree.o
|
|
LD /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/objtool-in.o
|
|
LINK /home/neo/Público/nfdos/src/_nfdos/kernel/linux/tools/objtool/objtool
|
|
make scripts
|
|
✔ Patched: include/linux/stddef.h
|
|
✔ Patched: include/linux/types.h
|
|
→ Boot directory forced to GNU11: arch/x86/boot
|
|
→ Boot directory forced to GNU11: arch/x86/boot/compressed
|
|
→ Boot directory forced to GNU11: drivers/firmware/efi/libstub
|
|
→ Global C23 overrides neutralized in main Makefile
|
|
✔ Kernel headers & boot toolchain fully sanitized.
|
|
git checkout -- arch/x86/mm/init.c
|
|
cp /home/neo/Público/nfdos/src/_nfdos/init.c /home/neo/Público/nfdos/src/_nfdos/kernel/linux/arch/x86/mm/init.c
|
|
→ Aplicando overrides de configuração...
|
|
scripts/config --enable CONFIG_PRINTK
|
|
[...]
|
|
scripts/config --enable CONFIG_BINFMT_SCRIPT
|
|
make olddefconfig
|
|
HOSTCC scripts/basic/fixdep
|
|
HOSTCC scripts/kconfig/conf.o
|
|
HOSTCC scripts/kconfig/confdata.o
|
|
HOSTCC scripts/kconfig/expr.o
|
|
HOSTCC scripts/kconfig/lexer.lex.o
|
|
HOSTCC scripts/kconfig/menu.o
|
|
HOSTCC scripts/kconfig/parser.tab.o
|
|
HOSTCC scripts/kconfig/preprocess.o
|
|
HOSTCC scripts/kconfig/symbol.o
|
|
HOSTCC scripts/kconfig/util.o
|
|
HOSTLD scripts/kconfig/conf
|
|
#
|
|
# configuration written to .config
|
|
#
|
|
✔ Overrides aplicados com sucesso.
|
|
make olddefconfig
|
|
HOSTCC scripts/basic/fixdep
|
|
HOSTCC scripts/kconfig/conf.o
|
|
HOSTCC scripts/kconfig/confdata.o
|
|
HOSTCC scripts/kconfig/expr.o
|
|
HOSTCC scripts/kconfig/lexer.lex.o
|
|
HOSTCC scripts/kconfig/menu.o
|
|
HOSTCC scripts/kconfig/parser.tab.o
|
|
HOSTCC scripts/kconfig/preprocess.o
|
|
HOSTCC scripts/kconfig/symbol.o
|
|
HOSTCC scripts/kconfig/util.o
|
|
HOSTLD scripts/kconfig/conf
|
|
#
|
|
# No change to .config
|
|
#
|
|
make -j 4
|
|
SYNC include/config/auto.conf.cmd
|
|
[...]
|
|
Kernel: arch/x86/boot/bzImage is ready (#1)
|
|
✔ Kernel compilado com sucesso!
|
|
```
|
|
qemu standard ok:
|
|
```
|
|
# 🧠 Monta a linha base do QEMU
|
|
kernel_params = (
|
|
"console=ttyS0 earlyprintk=serial,ttyS0,115200 "
|
|
"keep_bootcon loglevel=8"
|
|
)
|
|
|
|
qemu_cmd = (
|
|
f"qemu-system-x86_64 "
|
|
f"-machine q35,accel=kvm " # q35,accel=kvm
|
|
f"-cpu qemu64 " # qemu64
|
|
f"-kernel {bz_image} "
|
|
f"-initrd {nfdos_dir}/initramfs.cpio.gz "
|
|
f"-append '{kernel_params}' "
|
|
f"-drive file={data_disk},if=virtio,format=raw "
|
|
f"-m 1024 "
|
|
# f"-vga std "
|
|
# f"-display default "
|
|
# f"-serial mon:stdio "
|
|
f"-nographic "
|
|
f"-no-reboot"
|
|
)
|
|
```
|
|
e temos o neurotron a falar conosco:
|
|
```
|
|
Linux version 6.12.0-nfdos (neo@notebook) (x86_64-nfdos-linux-musl-gcc (crosstool-NG 1.28.0.1_403899e) 15.2.0, GNU ld (crosstool-NG 1.28.0.1_403899e) 2.45) #1 Wed Dec 3 15:21:12 CET 2025
|
|
Command line: console=ttyS0 earlyprintk=serial,ttyS0,115200 keep_bootcon loglevel=8
|
|
BIOS-provided physical RAM map:
|
|
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
|
|
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
|
|
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
|
|
BIOS-e820: [mem 0x0000000000100000-0x000000003ffdbfff] usable
|
|
BIOS-e820: [mem 0x000000003ffdc000-0x000000003fffffff] reserved
|
|
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
|
|
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
|
|
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
|
|
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
|
|
printk: legacy bootconsole [earlyser0] enabled
|
|
printk: debug: skip boot console de-registration.
|
|
NX (Execute Disable) protection: active
|
|
APIC: Static calls initialized
|
|
SMBIOS 3.0.0 present.
|
|
DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
|
|
DMI: Memory slots populated: 1/1
|
|
tsc: Fast TSC calibration failed
|
|
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
|
|
e820: remove [mem 0x000a0000-0x000fffff] usable
|
|
last_pfn = 0x3ffdc max_arch_pfn = 0x400000000
|
|
MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
|
|
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
|
|
found SMP MP-table at [mem 0x000f5470-0x000f547f]
|
|
RAMDISK: [mem 0x3e831000-0x3ffcffff]
|
|
Intel MultiProcessor Specification v1.4
|
|
MPTABLE: OEM ID: BOCHSCPU
|
|
MPTABLE: Product ID: 0.1
|
|
MPTABLE: APIC at: 0xFEE00000
|
|
Zone ranges:
|
|
DMA [mem 0x0000000000001000-0x0000000000ffffff]
|
|
DMA32 [mem 0x0000000001000000-0x000000003ffdbfff]
|
|
Normal empty
|
|
Movable zone start for each node
|
|
Early memory node ranges
|
|
node 0: [mem 0x0000000000001000-0x000000000009efff]
|
|
node 0: [mem 0x0000000000100000-0x000000003ffdbfff]
|
|
Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffdbfff]
|
|
On node 0, zone DMA: 1 pages in unavailable ranges
|
|
On node 0, zone DMA: 97 pages in unavailable ranges
|
|
On node 0, zone DMA32: 36 pages in unavailable ranges
|
|
Intel MultiProcessor Specification v1.4
|
|
MPTABLE: OEM ID: BOCHSCPU
|
|
MPTABLE: Product ID: 0.1
|
|
MPTABLE: APIC at: 0xFEE00000
|
|
Processor #0 (Bootup-CPU)
|
|
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
|
|
Processors: 1
|
|
CPU topo: Max. logical packages: 1
|
|
CPU topo: Max. logical dies: 1
|
|
CPU topo: Max. dies per package: 1
|
|
CPU topo: Max. threads per core: 1
|
|
CPU topo: Num. cores per package: 1
|
|
CPU topo: Num. threads per package: 1
|
|
CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
|
|
[mem 0x40000000-0xafffffff] available for PCI devices
|
|
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
|
|
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
|
|
pcpu-alloc: [0] 0
|
|
Kernel command line: console=ttyS0 earlyprintk=serial,ttyS0,115200 keep_bootcon loglevel=8
|
|
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
|
|
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
|
|
Built 1 zonelists, mobility grouping on. Total pages: 262010
|
|
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
|
|
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
|
|
NR_IRQS: 4352, nr_irqs: 48, preallocated irqs: 16
|
|
Console: colour VGA+ 80x25
|
|
printk: legacy console [ttyS0] enabled
|
|
printk: legacy console [ttyS0] enabled
|
|
APIC: Switch to symmetric I/O mode setup
|
|
APIC: Switch to symmetric I/O mode setup
|
|
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
|
|
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
|
|
tsc: Unable to calibrate against PIT
|
|
tsc: Unable to calibrate against PIT
|
|
tsc: No reference (HPET/PMTIMER) available
|
|
tsc: No reference (HPET/PMTIMER) available
|
|
tsc: Marking TSC unstable due to could not calculate TSC khz
|
|
tsc: Marking TSC unstable due to could not calculate TSC khz
|
|
Calibrating delay loop... 6239.23 BogoMIPS (lpj=12478464)
|
|
Calibrating delay loop... 6239.23 BogoMIPS (lpj=12478464)
|
|
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
|
|
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
|
|
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
|
|
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
|
|
CPU: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
|
|
CPU: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
|
|
Speculative Store Bypass: Vulnerable
|
|
Speculative Store Bypass: Vulnerable
|
|
x86/fpu: x87 FPU will use FXSAVE
|
|
x86/fpu: x87 FPU will use FXSAVE
|
|
pid_max: default: 32768 minimum: 301
|
|
pid_max: default: 32768 minimum: 301
|
|
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
|
|
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
|
|
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
|
|
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
|
|
Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
|
|
Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
|
|
signal: max sigframe size: 1040
|
|
signal: max sigframe size: 1040
|
|
Memory: 990500K/1048040K available (6144K kernel code, 877K rwdata, 872K rodata, 624K init, 1324K bss, 55160K reserved, 0K cma-reserved)
|
|
Memory: 990500K/1048040K available (6144K kernel code, 877K rwdata, 872K rodata, 624K init, 1324K bss, 55160K reserved, 0K cma-reserved)
|
|
devtmpfs: initialized
|
|
devtmpfs: initialized
|
|
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
|
|
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
|
|
futex hash table entries: 256 (order: 0, 6144 bytes, linear)
|
|
futex hash table entries: 256 (order: 0, 6144 bytes, linear)
|
|
PCI: Using configuration type 1 for base access
|
|
PCI: Using configuration type 1 for base access
|
|
PCI: Probing PCI hardware
|
|
PCI: Probing PCI hardware
|
|
PCI: root bus 00: using default resources
|
|
PCI: root bus 00: using default resources
|
|
PCI: Probing PCI hardware (bus 00)
|
|
PCI: Probing PCI hardware (bus 00)
|
|
PCI host bridge to bus 0000:00
|
|
PCI host bridge to bus 0000:00
|
|
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
|
|
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
|
|
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
|
|
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
|
|
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
|
|
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
|
|
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
|
|
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
|
|
pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
|
|
pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
|
|
pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
|
|
pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
|
|
pci 0000:00:01.0: BAR 2 [mem 0xfebd4000-0xfebd4fff]
|
|
pci 0000:00:01.0: BAR 2 [mem 0xfebd4000-0xfebd4fff]
|
|
pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
|
|
pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
|
|
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
|
|
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
|
|
pci 0000:00:02.0: [8086:10d3] type 00 class 0x020000 PCIe Root Complex Integrated Endpoint
|
|
pci 0000:00:02.0: [8086:10d3] type 00 class 0x020000 PCIe Root Complex Integrated Endpoint
|
|
pci 0000:00:02.0: BAR 0 [mem 0xfeb80000-0xfeb9ffff]
|
|
pci 0000:00:02.0: BAR 0 [mem 0xfeb80000-0xfeb9ffff]
|
|
pci 0000:00:02.0: BAR 1 [mem 0xfeba0000-0xfebbffff]
|
|
pci 0000:00:02.0: BAR 1 [mem 0xfeba0000-0xfebbffff]
|
|
pci 0000:00:02.0: BAR 2 [io 0xc0c0-0xc0df]
|
|
pci 0000:00:02.0: BAR 2 [io 0xc0c0-0xc0df]
|
|
pci 0000:00:02.0: BAR 3 [mem 0xfebd0000-0xfebd3fff]
|
|
pci 0000:00:02.0: BAR 3 [mem 0xfebd0000-0xfebd3fff]
|
|
pci 0000:00:02.0: ROM [mem 0xfeb00000-0xfeb7ffff pref]
|
|
pci 0000:00:02.0: ROM [mem 0xfeb00000-0xfeb7ffff pref]
|
|
pci 0000:00:03.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
|
|
pci 0000:00:03.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
|
|
pci 0000:00:03.0: BAR 0 [io 0xc000-0xc07f]
|
|
pci 0000:00:03.0: BAR 0 [io 0xc000-0xc07f]
|
|
pci 0000:00:03.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
|
|
pci 0000:00:03.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]
|
|
pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]
|
|
pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]
|
|
pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
|
|
pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
|
|
pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
|
|
pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
|
|
pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
|
|
pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
|
|
pci 0000:00:1f.2: BAR 4 [io 0xc0e0-0xc0ff]
|
|
pci 0000:00:1f.2: BAR 4 [io 0xc0e0-0xc0ff]
|
|
pci 0000:00:1f.2: BAR 5 [mem 0xfebd6000-0xfebd6fff]
|
|
pci 0000:00:1f.2: BAR 5 [mem 0xfebd6000-0xfebd6fff]
|
|
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
|
|
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
|
|
pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f]
|
|
pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f]
|
|
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
|
|
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
|
|
pci 0000:00:01.0: PIIX/ICH IRQ router [1234:1111]
|
|
pci 0000:00:01.0: PIIX/ICH IRQ router [1234:1111]
|
|
PCI: pci_cache_line_size set to 64 bytes
|
|
PCI: pci_cache_line_size set to 64 bytes
|
|
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
|
|
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
|
|
e820: reserve RAM buffer [mem 0x3ffdc000-0x3fffffff]
|
|
e820: reserve RAM buffer [mem 0x3ffdc000-0x3fffffff]
|
|
pci 0000:00:01.0: vgaarb: setting as boot VGA device
|
|
pci 0000:00:01.0: vgaarb: setting as boot VGA device
|
|
pci 0000:00:01.0: vgaarb: bridge control possible
|
|
pci 0000:00:01.0: vgaarb: bridge control possible
|
|
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
|
|
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
|
|
vgaarb: loaded
|
|
vgaarb: loaded
|
|
clocksource: Switched to clocksource refined-jiffies
|
|
clocksource: Switched to clocksource refined-jiffies
|
|
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
|
|
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
|
|
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
|
|
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
|
|
PCI: CLS 0 bytes, default 64
|
|
PCI: CLS 0 bytes, default 64
|
|
platform rtc_cmos: registered platform RTC device (no PNP device found)
|
|
platform rtc_cmos: registered platform RTC device (no PNP device found)
|
|
Unpacking initramfs...
|
|
Unpacking initramfs...
|
|
workingset: timestamp_bits=62 max_order=18 bucket_order=0
|
|
workingset: timestamp_bits=62 max_order=18 bucket_order=0
|
|
virtio-pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 11
|
|
virtio-pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 11
|
|
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
|
|
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
|
|
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
|
|
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
|
|
virtio_blk virtio0: 1/0/0 default/read/poll queues
|
|
virtio_blk virtio0: 1/0/0 default/read/poll queues
|
|
virtio_blk virtio0: [vda] 1048576 512-byte logical blocks (537 MB/512 MiB)
|
|
virtio_blk virtio0: [vda] 1048576 512-byte logical blocks (537 MB/512 MiB)
|
|
Freeing initrd memory: 24188K
|
|
Freeing initrd memory: 24188K
|
|
Freeing unused kernel image (initmem) memory: 624K
|
|
Freeing unused kernel image (initmem) memory: 624K
|
|
Write protecting the kernel read-only data: 8192k
|
|
Write protecting the kernel read-only data: 8192k
|
|
Freeing unused kernel image (rodata/data gap) memory: 1176K
|
|
Freeing unused kernel image (rodata/data gap) memory: 1176K
|
|
Run /init as init process
|
|
Run /init as init process
|
|
with arguments:
|
|
with arguments:
|
|
/init
|
|
/init
|
|
with environment:
|
|
with environment:
|
|
HOME=/
|
|
HOME=/
|
|
TERM=linux
|
|
TERM=linux
|
|
random: crng init done
|
|
UP: 00:00:18 TICK: 0.62s MODO: DIAGNOSTIC
|
|
────────────────────────────────────────────────────────────────────────────────
|
|
[14:23:22] [info] tick ajustado 0.88s → 0.75s
|
|
[14:23:22] [debug] telemetry state=stable temp=0.7 cpu=0.0% mem=10.4% load=0.00 jitter=1.324s
|
|
[14:23:22] [debug] [trm.archaeologist] encontrou 3 eventos perigosos recentes → valence -0.30
|
|
[14:23:22] [debug] [trm.thought] mem estável — tendência favorável
|
|
[14:23:22] [debug] [trm.thought] sistema frio — margem para explorar
|
|
[14:23:22] [debug] [trm.engine] step ok: mode=active cog=stable energy=92.1 depth=1 valence=-2.70
|
|
[14:23:22] [heart] cpu=0.0% mem=10.4% tick=0.75s
|
|
[14:23:23] [disk] Filesystem existente detectado
|
|
[14:23:23] [debug] Vitals CPU=0.0% MEM=10.5% load1=0.0
|
|
[14:23:23] [info] [echo] CPU=0.0% MEM=10.5%
|
|
```
|
|
agora a parte do "como fiz?": fui no gitea buscar o ".config" que funcionava:
|
|
```
|
|
# Essenciais do sistema base
|
|
essentials = [
|
|
"CONFIG_PRINTK",
|
|
"CONFIG_TTY",
|
|
"CONFIG_SERIAL_8250",
|
|
"CONFIG_SERIAL_8250_CONSOLE",
|
|
"CONFIG_SERIAL_EARLYCON",
|
|
"CONFIG_DEVTMPFS",
|
|
"CONFIG_DEVTMPFS_MOUNT",
|
|
"CONFIG_BLK_DEV_INITRD",
|
|
"CONFIG_TMPFS",
|
|
"CONFIG_PROC_FS",
|
|
"CONFIG_SYSFS",
|
|
# EXT4 base + alias para ext2
|
|
"CONFIG_PARTITION_ADVANCED",
|
|
"CONFIG_EFI_PARTITION",
|
|
"CONFIG_MSDOS_PARTITION",
|
|
"CONFIG_EXT4_FS",
|
|
"CONFIG_EXT4_USE_FOR_EXT2",
|
|
"CONFIG_CMDLINE_PARTITION",
|
|
"CONFIG_MCORE2",
|
|
#"CONFIG_EXT4_FS_POSIX_ACL",
|
|
#"CONFIG_EXT4_FS_SECURITY",
|
|
# Console VGA (comentado para modo serial-only)
|
|
# "CONFIG_VT",
|
|
# "CONFIG_VT_CONSOLE",
|
|
# "CONFIG_VGA_CONSOLE",
|
|
# "CONFIG_FB",
|
|
# "CONFIG_FB_VESA",
|
|
# "CONFIG_FRAMEBUFFER_CONSOLE",
|
|
# "CONFIG_FONT_8x16",
|
|
# "CONFIG_FONT_8x8",
|
|
# # "CONFIG_X86_MCE",
|
|
# # "CONFIG_X86_MCE_INTEL",
|
|
# "CONFIG_X86_LOCAL_APIC",
|
|
# "CONFIG_X86_IO_APIC",
|
|
# "CONFIG_X86_MSR",
|
|
# "CONFIG_X86_FEATURE_NAMES",
|
|
# "CONFIG_X86_TSC",
|
|
# "CONFIG_X86_CMOV",
|
|
# "CONFIG_RD_GZIP",
|
|
# "CONFIG_RD_BZIP2",
|
|
# "CONFIG_RD_LZMA",
|
|
# "CONFIG_RD_XZ",
|
|
# "CONFIG_RD_LZO",
|
|
# "CONFIG_RD_LZ4",
|
|
]
|
|
|
|
# VirtIO (para bloco, rede, PCI)
|
|
virtio = [
|
|
"CONFIG_PCI",
|
|
"CONFIG_VIRTIO",
|
|
"CONFIG_VIRTIO_MENU",
|
|
"CONFIG_VIRTIO_PCI",
|
|
"CONFIG_VIRTIO_PCI_LEGACY",
|
|
"CONFIG_VIRTIO_BLK",
|
|
"CONFIG_VIRTIO_NET",
|
|
"CONFIG_VIRTIO_CONSOLE",
|
|
"CONFIG_VIRTIO_INPUT",
|
|
"CONFIG_VIRTIO_MMIO",
|
|
"CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES",
|
|
"CONFIG_BLK_MQ_VIRTIO",
|
|
"CONFIG_BLOCK",
|
|
"CONFIG_BLK_DEV",
|
|
"CONFIG_BLOCK_LEGACY_AUTOLOAD",
|
|
"CONFIG_EXPORTFS_BLOCK_OPS",
|
|
"CONFIG_MSDOS_PARTITION", # assegura parsing de tabela de partições
|
|
]
|
|
|
|
# Debug e early printk
|
|
debug = [
|
|
"CONFIG_DEBUG_KERNEL",
|
|
"CONFIG_EARLY_PRINTK",
|
|
"CONFIG_SERIAL_8250_PNP",
|
|
"CONFIG_DEBUG_INFO_NONE", # evita symbols extras
|
|
]
|
|
|
|
# Garante compatibilidade máxima de CPU (para manter o kernel leve, limpo e evitar CR4 panics)
|
|
disable_extras = [
|
|
# modo serial-only
|
|
"CONFIG_VT",
|
|
"CONFIG_VT_CONSOLE",
|
|
"CONFIG_VGA_CONSOLE",
|
|
"CONFIG_FRAMEBUFFER_CONSOLE",
|
|
"CONFIG_DUMMY_CONSOLE",
|
|
"CONFIG_FB",
|
|
"CONFIG_DRM",
|
|
"CONFIG_DRM_I915",
|
|
"CONFIG_LOGO",
|
|
"CONFIG_X86_PAE",
|
|
"CONFIG_X86_5LEVEL",
|
|
"CONFIG_RANDOMIZE_BASE",
|
|
"CONFIG_RETPOLINE",
|
|
"CONFIG_SMAP",
|
|
"CONFIG_SMEP",
|
|
"CONFIG_PAGE_TABLE_ISOLATION",
|
|
# modo VGA
|
|
# Deixar estes quatro comentados. Eles são core para x86_64 + QEMU.
|
|
# "CONFIG_X86_PAE",
|
|
# "CONFIG_X86_PGE",
|
|
# "CONFIG_X86_PAT",
|
|
# "CONFIG_X86_PSE",
|
|
#
|
|
# "CONFIG_X86_PSE36",
|
|
# "CONFIG_X86_VME",
|
|
# "CONFIG_X86_PVI",
|
|
# "CONFIG_X86_PCID",
|
|
# "CONFIG_PAGE_TABLE_ISOLATION",
|
|
# "CONFIG_PARAVIRT",
|
|
# "CONFIG_PARAVIRT_CLOCK",
|
|
# "CONFIG_ARCH_RANDOM",
|
|
]
|
|
```
|
|
|
|
E no GRUB:
|
|
GRUB_GFXMODE=1024x768x32
|
|
GRUB_GFXPAYLOAD_LINUX=keep |